Description
Kit includes:
ECU Tune
Clutch kit. Choose the Elite kit or Torque monster. (Torque Monster is the best option!)
The Torque Monster clutch kit upgrade is the best performing kit available. If you want the strongest low end grunt, most belt grip, max overall performance then this is the kit for you!
Basic Elite Shift Clutch Kit (Solid Clutch Weights, High Performance Spring, Mid Performance Lower RPM Spring, Spring Spacer, Alignment Shims)
The Elite Shift Clutch Kit comes with two different setups:
- Setup One: Maximum overall performance. This setup uses the shorter spring and spring spacer from our kit. It offers maximum performance and runs at a higher rpm.
- Setup Two: Mid performance lower rpm. This setup uses the longer black spring from our kit with no spring spacer. The lower rpm setup runs at a lower rpm compared to the high performance setup. The low rpm setup is commonly used where guys like to cruise at lower speeds or are looking for a bit milder performance compared to the max performance setup.
Gilomen Innovations Polaris Ranger 1000 G5 100 HP ECU tune and clutch kit. This tune is specifically designed for the 2018+ Ranger 1000 gen 2 models. Each tune is setup specifically for your exact model and tire size. This tune and clutch kit turns your slow doggy Ranger in to a powerful, fun, fast and very responsive machine! The three position performance switch on the dash remains fully functional. The "work" and "standard" modes stay stock while the "Performance" mode offers all out power!. If your machine is equipped with turf mode I can assure you it will stay fully functional just as it was designed to be. This tune does not cause any codes / check engine lights. It allows 100% power in All gears. The seat-belt limiter is disabled. This tune version is the most aggressive and only reflash currently offered by Gilomen Innovations for the 1000cc Ranger models. It performs great on 87 octane gas and even better on 91 octane gas. All engine protections are left in place. Fuel and timing maps are revised for peak performance on pump gas while keeping your piston crown temps and valves cooler than stock. Additional protection is offered by lowering the cooling fan temp from 205 degrees down to 190 to keep your engine running cooler and lasting longer. Rev limiter is raised to a safe 8800 RPM, Speed limiters in all gears are eliminated. Clutch tuning is absolutely needed with this tune that is why I offer this ECU tune with clutch kit options to allow the engine to run at the RPM where peak power and efficiency is. The stock clutching is designed to run at 6100-6400 RPM which is way too low for this tune, after this ECU tune the peak HP is over 7000 RPM. If you want full potential out of this tune you absolutely NEED to re-clutch. The Elite shift clutch kit is amazing with this tune. Take off is very smooth yet very responsive. We also offer our Torque Monster adjustable clutch kit for people looking for amazing torque to the wheels, unreal belt grip, and strong acceleration. The clutch kits include detailed install instructions and torque specs. No pullers are needed to install the clutch kit. Most people can install the clutch kit in 30 minutes. Once you receive the ECU and clutch kit simply install the clutch kit and plug in the ECU and you are ready to go. Price includes shipping to you. Turn around time is 1 business day. You can have faith in us to give you the best possible customer service. All of our tunes are developed in house with our engine dynamometer using the best tuning strategies known. Many other tuning companies use tune developers from over seas to design their tunes. That creates less than ideal final product because communications back and forth with the developer can be difficult and time consuming.
If you purchase an ECU tune from our website and are sending in your original ECU for us to tune you do not need to print and fill out the customer information form because all of your machine and customer info is filled out during checkout online. Please just put a note in the box with your name so we know its yours when it arrives. If you are not buying the tune online and want to do it over the phone with a credit card please fill out this form and send it with your ECU.
Customer Info Form
Ship To:
Gilomen Innovations
30563 Dahomey Ave
Northfield Mn 55057
Features:
100% throttle in High, Low, and Reverse Gear
All Torque Limiters Disabled
Professionally developed timing maps for peak performance on pump gas
Professionally developed fuel maps
Fan settings 20 degrees lower to keep engine running cool and lasting longer
Seat-belt limiter disabled
RPM limiter raised to a safe 8800 RPM
Speed limiters eliminated
False misfire codes eliminated
False alternator codes eliminated 520625 codes
Engine protections left in place
A/C function left in place for Northstar models
ADC left in place for Hunter Edition models
Retains Turf mode on equipped models
Heater function works 100% if equipped
I have had several people ask if their heater will work as good in the winter after the 20 degree cooler fan temps and the answer is absolutely yes. I have tested this during the harsh winter in Minnesota on my personal machine and found the heat works exactly the same. The reason for this is because the engine has a 180 degree thermostat and during the winter the cooling fan rarely comes on with or without a tuned ECU but the thermostat is always maintaining proper engine temp to keep the heater core hot.
UPDATE 3/12/2018 Many Polaris models with stock ECU programming suffer from false misfire codes ( 65590, 65591, 65592 ) due to drive belt issues, excessive tire spin, constant high speed driving, or for no apparent reason at all. Polaris made these codes way too sensitive & are unable to delete the codes. Our newest version tunes 3/12/2018 and later will eliminates the false check engine codes 65590, 65591, 65592!! If you are a Polaris dealership that has unhappy customers because of these false codes please call us, we can help restore your customers faith in their new Polaris machine!
We offer 3 different ways to reflash your machine...
1. You may purchase a brand new ECU from us
2. You may purchase one of our used ECU's (availability is limited) CORE EXCHANGE PROGRAM
3. You can send your stock ECU in to us
RE-TUNE PROCEDURE WHEN SENDING US YOUR STOCK ECU:
Write your name on your ECU or a slip of paper to send along with your ECU. You ship your ECU to us with any carrier you wish. Once we receive your ECU in our shop, we will reflash your ECU & send it back to you within one-business day! If you have any questions please email me terry@gilomeninnovations.com or call us @ 507-645-4555.
If you are not buying the tune thru our website and want to do it over the phone with a credit card please fill out this form and send it with your ECU. Customer Info Form
Ship To:
Gilomen Innovations
30563 Dahomey Ave
Northfield Mn 55057
IF YOU ARE LOOKING TO REMOTE TUNE YOUR MACHINE WITH ONE OF THE LISTED DEVICES YOU MUST READ THIS AND FOLLOW THE INSTRUCTIONS BELOW:
EZ LYNK AUTO AGENT 2 REMOTE TUNE
If you are flash tuning your machine yourself using the EZ LYNK AUTO AGENT 2 device you will need to Lynk your vehicle to Gilomen Innovations through the EZ Lynk Auto Agent app on your android or apple phone. Lynk your vehicle to our technician account terry@gilomeninnovations.com
Once you Lynk your vehicle to Gilomen Innovations we will configure your new tune and send it through the cloud to your app on your phone so you can flash tune your machine if you already purchased the tune through our website. No tune credits or other fees are involved when using this device. If you are renting an EZ LYNK device from Gilomen you have 30 days to return the device for a $480 refund. If you purchase the device to keep, then the device is not returnable after it has been used to flash the machine. The EZ lynk device can be used on unlimited machines with a Gilomen-provided tune for each individual machine.
If you need assistance with using the device or application you will need to contact EZ LYNK support https://www.ezlynk.com/support/
Gilomen does not offer support regarding the EZ LYNK device or application. We simply provide this device as another avenue to tune your machine.
DYNOJET POWER VISION REMOTE TUNE
If you are flash tuning your machine yourself using a dyno jet device you will need to email us the STK file and the PV-INFO file so we can configure a tune for your machine and email it to you. Email your STK and PV-INFO file to terry@gilomeninnovations.com
You need to purchase a tune on our website first.
GILOMEN INNOVATIONS DOES NOT OFFER TECHNICAL SUPPORT FOR THE DYNOJET DEVICE. IF YOU ARE HAVING TROUBLE USING THE DEVICE YOU WILL NEED TO CONTACT DYNOJET SUPPORT.
HP TUNERS REMOTE TUNE
If you are flash tuning your machine yourself using the HP Tuners device you will need to email us the vehicle vin #, the stock file that you read out of the machine, and your HP Tuners serial number / interface ID # which is on the back of your device. It is your responsibility to have the knowledge to use the HP tuners device to flash your machine. You are responsible to obtain the proper credits to license your vehicle vin # on your device. You need to purchase a tune on our website first. GILOMEN INNOVATIONS DOES NOT OFFER TECHNICAL SUPPORT FOR THE HP TUNERS DEVICE. IF YOU ARE HAVING TROUBLE USING THE HP TUNERS DEVICE OR THEIR SOFTWARE YOU WILL NEED TO CONTACT HP TUNERS SUPPORT.
GILOMEN I-FLASH DEVICE REMOTE TUNE
You will need to purchase a tune on our website first.
Then read the stock tune from your machine and email it to Gilomen Innovations:
Once we receive your stock tune file we'll match it up with your order and configure the new tune then email it to you to flash to your machine.