4 SEAT

The PRO R 4 CYLINDER ecu tune is here, and this tune is awesome! This performance ECU tune is a premium 91+ octane pump gas friendly trail version tune offered by Gilomen Innovations for the PRO R 4 CYLINDER models.  100+ octane Race fuel type tunes...

The PRO R 4 CYLINDER ecu tune is here, and this tune is awesome! This performance ECU tune is a premium 91+ octane pump gas friendly trail version tune offered by Gilomen Innovations for the PRO R 4 CYLINDER models.  100+ octane Race fuel type tunes...

This tune is to eliminate the 65590, 65591, 65592, P0301, P0302, P0314 false misfire code problems on all Polaris PRO  models. This is for machines with the stock Polaris factory programming. This fix can not be performed on ECU's that have been...

CK11010 Super Clutch Kit.   This kit includes: Blackmax R adjustable clutch weights  Magnets for the clutch weights to adjust mass Primary clutch spring  secondary spring Upgrade Helix  This clutch kit is the ultimate kit for...

Primary clutch spring

Weight:Stock Muffler: 23.55 lbsGGB Sport: 15 lbsWeight Savings: 8.55 lbsDecibel Levels:Stock Decibel:Idle-83.53500-875000-95GGB Decibel:Idle-88.5-893500-91.5-92.55000-95.5-96.5 The exhaust system your Pro R deserves! Built entirely from 304...

Built to withstand the harshest environments and extreme shock-load. These ARE the World’s Best Secondary Rollers on the market! Massive amounts of mechanical Strength coming in at 16,000 (psi) of Tensile Strength Extreme...

SPECIAL CLUTCH WEIGHTS FOR PRO R MODELS WITH TURBO OR SUPERCHARGER INSTALLED.   130-172 GRAMS ADJUSTABLE

High performance secondary helix for 22+ PRO R 4 CYLINDER MODELS

High performance secondary spring for 22+ PRO R 4 CYLINDER MODELS

Primary clutch spring spacer washer.  By installing this spacer, you will see your engagement rpm increase by 100-150 rpm.  You can install up to two spacer washers without coil bind.  2.0"ID 2.5"OD 0.100" Thick    

Set of 6 alignment shims that go under the bolt on the secondary clutch.  These shims are the same diameter and thickness as the stock shims.  Adding shims will move the belt towards the engine, removing shims moves the belt away from the...

Features: ENCLOSES THE CLUTCH TOWERS FOR ADDED STRENGTH.  TESTED ON MACHINES AT EXTREME POWER LEVELS 700+ HP WITH OUTSTANDING RESULTS! Decreases belt temp, prolonging belt lifeAbout 25 CFM above stock down lowUp to 50 CFM above stock at full...

Belt removal tool.  Threads into the secondary clutch to open it in order to remove and install the drive belt. 

Clutch Puller to Remove Primary Clutch From the Crankshaft    

Take absolute control of your next adventure with the Throttle Commander for your Polaris UTV. Hitting the track for a Race? Headed to the rock garden for some extreme crawling? Hauling a load of hay to the livestock through the rough field? This device...

Gilomen Baseball Cap  One size fits all

Gilomen T-Shirt 

Harness kit only for SpeedoHealer v4 modules. (Does not include SpeedoHealer v4 module)