Created with Sketch. Created with Sketch.

RZR 900 50/55 Inch

Scroll Down To See Products

The RZR 900 ECU tune and clutch kit combo totally rocks! The ECU tune is pump gas friendly and the most aggressive trail version reflash currently offered by Gilomen Innovations for the 900cc RZR models. It offers a 10.2 HP gain over stock.  All engine protections are left in place so your engine stays running safe. Fuel and timing maps revised for peak performance on pump gas. I have found that Polaris has their factory tuning designed in order to pass strict EPA testing. The revised timing and fuel maps allow the engine to make more power with cooler piston crown and valve temps. The cooling fan on temp is lowered from 205F to 190F degrees to keep your engine running cooler and lasting longer. Rev limiter is raised to 9200 RPM, Speed limiter in high gear is eliminated, Speed limiter in low gear raised to 45 MPH. Speeds can exceed 88 MPH with this tune. Once you get the tuned ECU from us simply plug it in and you are ready to go. Price includes shipping to you. It is your responsibility to get your ecu to me. Turn around time is 1 business day. 

Features:
100% throttle in High, Low, and Reverse Gear
All Torque Limiters Disabled
Professionally developed timing maps for peak performance on pump gas
Professionally developed fuel maps
Fan settings 20 degrees lower to keep engine running cool and lasting longer
Seat-belt limiter disabled
RPM limiter raised to a safe 9200 RPM
Speed limiters eliminated 
Turf mode stays fully functional if equipped
Engine protections left in place

Clutch: The stock clutch calibration on all 900 RZR models is lazy and has much room for improvement.  Our Elite Shift clutch kit offers very smooth take off and is designed to allow the engine to run at the proper RPM where it performs the best. The kit consists of primary weights, spring and detailed instructions.  Our ECU tune/clutch kit packages come with an Elite Shift clutch kit or you can chose to go with our BlackMax adjustable clutch kit. If you are running larger than 29" tires you will need to purchase the Mudder Secondary Spring which will squeeze the drive belt harder preventing belt slippage. If you are someone that likes to test/tune and play with different setups then I recommend purchasing a set of our BlackMax adjustable clutch weights. The BlackMax adjustable clutch weights allow you to add or remove weight in order to raise or lower the engine operating rpm. The adjustable clutch weights are popular for large tire builds, competition use, and high elevation use. We also offer the BlackMax adjustable weights in a kit that includes the weights, primary spring and an option secondary spring for larger than 29" tires. It is also an option to chose the BlackMax adjustable kit in our ECU tuning packages. 


The stock secondary clutch that comes on the 2015 900 models is the cheap Rapid Reaction throw away clutch. These clutches are know to fail because of the cheap design and cause bet slippage in extreme​ use conditions. I recommend installing our HD Team Tied secondary clutch if you want the absolute strongest and best performing secondary clutch available for the 900 RZR!  

If you have a 2016+ 900 RZR then you have the factory BOSS secondary clutch which comes with square pucks as a friction point in the clutch. The pucks cause a tremendous amount of wear on the clutch and will eventually destroy the clutch.  I highly recommend you replace the square pucks with our super high quality composite rollers. Performance and longevity is much better with these rollers installed.  If your secondary clutch is shot or you just want to upgrade to a much higher quality clutch then I suggest our HD Team Tied roller clutch. 

Belt: The stock Polaris belt is weak and jerky. It cannot handle any type of stress or abuse. I have found the G-Boost BadAss belt to be the absolute best performing, smoothest, and longest lasting belt on the market. I highly recommend installing one!!! 

Primary Clutch kit install instructions

Rapid Reaction secondary spring install instructions

BOSS Secondary Clutch big tire, helix and rollers install instructions 

Factory Service Manual

  • 1148 G-Boost Badass / Sandstorm belt

    We have found the BadAss / Sandstorm series belts to be the strongest longest lasting belts available, Period! Features: High temperature, heat resistant polymer DUMAX (TM) with directionally-oriented fibers under the base cord construction Will handle...

    $148.99 $140.00
  • Polaris Misfire Fix Tuning Tune

    ECU False Misfire Code Fix Tune 65590 65591 65592

    This is a fix to eliminate the 65590, 65591, 65592 false misfire code problem on all Polaris RZR, Turbo, General, Ranger, 900 and 1000 models. This is for machines with the stock Polaris factory programming. This fix can not be performed on ECU's that...

    $220.00
  • P90 Super Cool Clutch Cover.  Gilomen P90 Super Cool Clutch Cover.  Gilomen

    Super Cool Clutch Cover For P90 Standard Primary Clutch

    Features: Decreases belt temp, prolonging belt lifeAbout 25 CFM above stock down lowUp to 50 CFM above stock at full shift-outConstant cooling, direct on the primary clutchBillet aluminum construction, built to lastDesigned and built here in the...

    $190.00
  • Elite shift clutch kit.  Gilomen Innovations Elite shift clutch kit shown with secondary spring

    Elite Shift Clutch Kit

    Our Elite Shift clutch kit offers very smooth take off and is designed to allow the engine to run at the proper RPM where it performs the best. The kit consists of primary weights, spring and detailed instructions. We offer the Elite Shift clutch kits...

    $130.00
  • Polaris ranger 900 HD upgrade primary clutch Polaris 900 Primary Clutch HD Cyclone Cooler Design

    Polaris 900 Primary Clutch HD Cyclone Cooler Design

    Heavy Duty Primary Clutch. This clutch has the HD RZR type spider design and cyclone HD clutch cover with cooling fins. Clutch and belt temps are dramatically lower with this design. Balanced and trued. Clutch does not come with spring or clutch weights...

    $650.00 $600.00
  • Gilomen Blackmax adjustable clutch kit Polaris Ranger 900, Ace 900, RZR 900

    Blackmax Adjustable Clutch Kit

    Blackmax Adjustable clutch kit. This kit offers smooth take off yet aggressive acceleration, and very responsive power. The kit includes billet steel magnetic adjustable primary clutch weights, primary spring and an optional secondary spring. Please...

    $200.00
  • Polaris 900 P90 Primary clutch.  Ranger, RZR, ACE
photo 1 Polaris 900 P90 Primary clutch.  Ranger, RZR, ACE
photo 2

    Primary Clutch P90 For 900 Models Replacement Clutch

    New 900 Polaris OEM primary clutch.  If your clutch is worn out or damaged this is the perfect replacment.  See the options if you would like to choose a clutch kit or belt.  This is the newest version clutch from Polaris which includes...

    $500.00
  • Polaris Blackmax Adjustable Weights for the P90 UTV Polaris Primary Clutch.  
Gilomen Innovations Polaris Blackmax Adjustable Weights for the P90 UTV Polaris Primary Clutch.  
Gilomen Innovations

    P90 Blackmax Adjustable Clutch Weights

    BlackMax adjustable primary weights for the Polaris standard p90 clutch found on most models from 2013+. These weights are made out of high carbon machine billet steel. The weights are adjustable using powerful rare earth magnets. If you are someone that...

    $175.00
  • Polaris P90 Primary Clutch Weight Ranger 900, 1000, RZR, General, ACE

    P90 Solid Fixed Clutch Weight (sold each)

    Gilomen Innovations  Solid fixed clutch weight for the P90 primary clutch used on many models.  This weight is used in some of our clutch kits that we offer.   Replacement weights if one of your weights became damaged from a failed...

    $30.00
  • Polaris P90 & P90X Primary Spring Ranger, General, RZR, ACE

    Primary Clutch Spring P90 & P90X

    Gilomen Innovations primary clutch spring for P90 standard clutch that comes on most models from 2013+ and the P90X clutch that come on the 2018+ Ranger 1000 models.  Choose your spring rate 

    $30.00
  • Polaris P90 Primary Clutch Jam Nut

    Spider Jam Nut for P90 Primary Clutch

    This is the jam nut that the factory used on all 2016 and newer drive clutches. The earlier 900 Ranger and RZR drive clutches did not come with this jam nut and are prone to having the spider unthread. If your clutch is missing the jam nut I highly...

    $26.00
  • Polaris one way bearing for p90 primary clutch  1521172

    P90 Primary Clutch One Way Roller Bearing

    Polaris part # 1521172   This genuine Polaris part fits many Ranger, General, models with EBS (Engine Braking System). Over time, dirt and debris can get in this bearing causing it to drag and eventually seize up. The symptoms of a dragging clutch...

    $50.00
  • Two way bearing for p90 primary clutch used on many models 3514609

    P90 Primary Clutch Two Way Roller

    Polaris part # 3514609   This genuine Polaris part fits many Ranger, General, ACE and RZR models without EBS (Engine Braking System). Over time, dirt and debris can get in this bearing causing it to drag and eventually seize up. The symptoms of a...

    $40.00
  • Clutch Compression Tool

    Clutch Compression Tool

    This tool is used to dismantle and assemble the primary and secondary clutches on Polaris models.

    $90.00
  • Jam Nut Driver Tool Polaris 900 / 1000 clutches

    Jam Nut Driver Tool Polaris 900 / 1000 clutches

    Fits: Polaris 900 Ranger 13-18, 900 Ranger Crew 14-18, 900 RZR XP 4x4 11-14, 900 RZR XP 4 4x4 12-14, 900 RZR 15-18, 900 RZR 4 15-18, 900 RZR S 15-18, 900 RZR XC 15-17, 1000 RZR XP 14-18, 1000 RZR XP 4 14-18, 1000 RZR S 16-18, RZR XP Turbo 16-18, RZR...

    $49.00
  • Polaris Clutch Puller

    Clutch Puller

    Clutch Puller to Remove Primary Clutch From the Crankshaft    

    $48.00
  • Polaris primary spring engagement shim.  Raise engagement by 150 rpm

    Spring Engagement Spacer / Shim + 150 rpm

    Spring spacer engagement shim.  This shim is designed to go under the spring in the primary clutch to raise the engaement rpm.  Most applications see an increase of 150-200 rpm by installing this shim.  You can install up to two shims in...

    $7.00
  • Primary Clutch Holding Fixture Tool

    Primary Clutch Holding Fixture Tool

    Used for holding Polaris primary clutches during disassembly to service spider and moveable sheave Can be mounted to bench or clamped in vise Works on all the Polaris ATV / UTV models, It even works on the RZRTurbo Clutch    

    $120.00
Compare Selected
.CategoryContent .ProductList .Message { display: none; }