Gilomen Innovations

Secondary Clutch Bushing Retainer Plate For Inner Sheave (DOES NOT FIT SOHC MODELS)

(7 reviews) Write a Review
SKU:
1199-1
View full product description
  • Secondary Clutch Bushing Retainer For Inner Sheave
  • Secondary Clutch Bushing Retainer For Inner Sheave
  • Secondary Clutch Bushing Retainer For Inner Sheave
  • Secondary Clutch Bushing Retainer For Inner Sheave
MSRP: $45.00
$44.00
— You save $1.00

Description

Bushing Retainer Plate for Secondary Clutch Inner Sheave Bushing. 

This retainer plate prevents the bushing from falling out.  The stock design is known to fail where the bushing falls out which destroys the inner sheave and usually damages the transmission shaft seal. 

It is not recommended to use this plate on a clutch that previously had a bushing fall out because the bore diameter where the bushing sits will be compromised.  This plate is to be used on a new clutch sheave as a preventative measure.  

 

Fits 2018-2020 Polaris Ranger 1000 models XP, HIGHLIFTER, NORTHSTAR, HUNTER, TEXAS, BACK COUNTRY, CREW.   

DOES NOT FIT SOHC MODELS. 

DOES NOT FIT 2021 AND NEWER MODELS. 

View AllClose

Additional Information

Part Type:
Clutch Parts
View AllClose

7 Reviews

  • 5
    Fits Well

    Posted by Richard Bodge on Sep 14th 2024

    I have seen/read too many videos/posts regarding the rear bushing on the secondary fail and damage the transmission seal lately and I don't want to be the next victim. I had just recently had to remove my trans to be rebuilt and have no intentions of removing it anytime soon. This retainer plate fits directly over the bushing and keeps it from backing out. I will include youtube video i recorded of removing the secondary to install the retainer plate on back. I did replace the rollers in the secondary as well since it was off.

  • 5
    Fixes the problem!

    Posted by Anthony Radford on Sep 12th 2024

    Thankfully Gilomen came up with a fix that Polaris wont!

  • 5
    Secondary Clutch Bushing Retainer Plate For Inner Sheave

    Posted by Jon Schultz on Aug 13th 2024

    So far so good. Seems to be doing a great job

  • 5
    Quality and desing

    Posted by Jordi Jane Muñoz on Apr 2nd 2024

    Great product, improves the reliability of the OEM secondary clutch in a 2020 RZR PRO XP, keeping the inner bushing in its place. It is a must to use it.

  • 4
    Description/product application

    Posted by Jordi Jane on Dec 1st 2023

    Not sure per the description of the product if it fits and if it is recomended to install this retainer in a secondary. of a RZR PRO XP 2020, can you please confirm?

  • 5
    Works as advertised - fits great

    Posted by Kyle on Jul 13th 2023

    Super simple solution to the problem with a worn inner sheave bushing. Mine failed at 9800 miles. This will prevent the next failure and keep me on the trail!

  • 5
    every high quality nice fit

    Posted by tomkatblue@hotmail.com on Feb 22nd 2022

    fast delivery

View AllClose