Description
The RZR 1000 XP ECU tune is awesome! This performance ECU tune is a pump gas friendly performance tune offered by Gilomen Innovations for the 2024+ RZR 1000 XP models. All engine protections are left in place, so your engine stays running safe. Fuel and timing maps revised for peak performance. The cooling fan on temp is lowered from 205F to 190F degrees to keep your engine running cooler and lasting longer. Rev limiter is raised to 9000 RPM, Speed limiter in high gear is eliminated, Speed limiter in low gear raised to 45 MPH. Once you get the tuned ECU from us, simply plug it in, and you are ready to go. 10.3 crankshaft HP gain over stock (114.3 HP stock to 124.6 HP tuned on our dyno). Price includes shipping to you. If you are sending us your ECU, it is your responsibility to get your ecu to me. Turn around time is 1 business day, which means we will tune your ecu, and it will ship back out of our tuning facility the business day after it received. Custom tuning generally takes an extra day or two.
Our performance clutch kit is recommended to provide more belt grip and proper shift phase rpm, so the engine runs within the power band of the performance tune.
Features:
- 100% throttle in high range, increase throttle output and in low and reverse
- All Torque Limiters Disabled
- Professionally developed timing maps for peak performance on pump gas
- Professionally developed fuel maps
- Start the engine in gear (stock, you have to put it in park to start the engine)
- Fan settings 20 degrees lower to keep engine running cool and lasting longer
- Seat-belt limiter disabled
- RPM limiter raised to a safe 9000 RPM
- Speed limiters eliminated
- Engine protections left in place
- Nuisance misfire codes eliminated
Newer Polaris with a locked, encrypted ECU? We can tune it now. Simple plug in and install tune with an EZ Lynk. All through the diagnostic port. No ECU removal. No unlock needed. Works on the MG1 type ECU that comes in many of the newer models. You can also get a pre-tuned ECU from us, or mail us your ECU. HP Tuners users need the ECU unlocked first (ECU Unlock Service is available as an add-on). Dynojet Power Vision and Gilomen I-Flash users get the tune file by email.
If you are sending in your ecu for tuning, please ship it to us here:
Be sure to place an order for tuning before you send your ecu, so we can match your ecu up with an order when it arrives here. If you send your ecu without placing an order beforehand, it can cause a day or two delay because we will need to reach out to you to gather information for the tune and customer info.