2 SEAT

The PRO R 4 CYLINDER ecu tune is here, and this tune is awesome! This performance ECU tune is a premium 91+ octane pump gas friendly trail version tune offered by Gilomen Innovations for the PRO R 4 CYLINDER models.  100+ octane Race fuel type tunes...

The PRO R 4 CYLINDER ecu tune is here, and this tune is awesome! This performance ECU tune is a premium 91+ octane pump gas friendly trail version tune offered by Gilomen Innovations for the PRO R 4 CYLINDER models.  100+ octane Race fuel type tunes...

The PRO R 4-CYLINDER TURBO KIT ecu tunes. Includes 91-93 pump gas, 110 octane, E70-E75, and E85 tunes. I have found a solution for the so-called boost / kpa limit in the factory ecu.  The E85 tuning supports boost levels up to 22 psi!  If you...

This tune is to eliminate the 65590, 65591, 65592, P0301, P0302, P0314 false misfire code problems on all Polaris PRO  models. This is for machines with the stock Polaris factory programming. This fix can not be performed on ECU's that have been...

CK11010 Super Clutch Kit.   This kit includes: Blackmax R adjustable clutch weights  Magnets for the clutch weights to adjust mass Primary clutch spring  secondary spring Upgrade Helix  This clutch kit is the ultimate kit for...

CK11014 DRAG RACING NOTCHED TURBOCHARGED / SUPERCHARGED PRO R 4 CYLINDER Super Clutch Kit. DESIGNED TO BE USED WITH A TWO-STEP LAUNCH CONTROL.  ENGAGEMENT RPM IS 3000-3800 RPM, WITH THIS DEPENDING ON THE ADJUSTMENTS YOU USE. This kit...

CK11013 TURBOCHARGED / SUPERCHARGED PRO R 4 CYLINDER Super Clutch Kit.   This kit includes: Blackmax PRO R 130-172 GRAM adjustable clutch weights  Magnets for the clutch weights to adjust mass Primary clutch spring  secondary...

Primary clutch spring

Weight:Stock Muffler: 23.55 lbsGGB Sport: 15 lbsWeight Savings: 8.55 lbsDecibel Levels:Stock Decibel:Idle-83.53500-875000-95GGB Decibel:Idle-88.5-893500-91.5-92.55000-95.5-96.5 The exhaust system your Pro R deserves! Built entirely from 304...

Built to withstand the harshest environments and extreme shock-load. These ARE the World’s Best Secondary Rollers on the market! Massive amounts of mechanical Strength coming in at 16,000 (psi) of Tensile Strength Extreme...

QTY 1 TUNGSTEN 12 GRAM SLUG, 7 STAINLESS WASHERS, AND SCREW. THE SLUG WITH ALL 7 WASHERS USED WEIGHTS 16.5 GRAMS TOTAL. THE SLUG SET REPLACES THE MAGNETS IN ONE HOLE FOR MORE MASS COMPARED TO THE STANDARD MAGNETS. FOR HIGH POWER APPLICATIONS    

SPECIAL DRAG RACING NOTCHED CLUTCH WEIGHTS FOR PRO R MODELS WITH TURBO OR SUPERCHARGER INSTALLED AND A TWO-STEP LAUNCH CONTROL.  144-176 GRAMS ADJUSTABLE I RECOMMEND USING THESE WEIGHTS WITH A STARTING SPRING RATE OF 110 LBS OR HIGHER.  OUR...

SPECIAL CLUTCH WEIGHTS FOR PRO R MODELS WITH TURBO OR SUPERCHARGER INSTALLED.   130-172 GRAMS ADJUSTABLE

High performance secondary helix for 22+ PRO R 4 CYLINDER MODELS

High performance secondary spring for 22+ PRO R 4 CYLINDER MODELS

Primary clutch spring spacer washer.  By installing this spacer, you will see your engagement rpm increase by 100-150 rpm.  You can install up to two spacer washers without coil bind.  2.0"ID 2.5"OD 0.100" Thick    

Set of 6 alignment shims that go under the bolt on the secondary clutch.  These shims are the same diameter and thickness as the stock shims.  Adding shims will move the belt towards the engine, removing shims moves the belt away from the...

Features: ENCLOSES THE CLUTCH TOWERS FOR ADDED STRENGTH.  TESTED ON MACHINES AT EXTREME POWER LEVELS 700+ HP WITH OUTSTANDING RESULTS! Decreases belt temp, prolonging belt lifeAbout 25 CFM above stock down lowUp to 50 CFM above stock at full...

Belt removal tool.  Threads into the secondary clutch to open it in order to remove and install the drive belt. 

Clutch Puller to Remove Primary Clutch From the Crankshaft    

Gilomen Baseball Cap  One size fits all

Gilomen T-Shirt 

Get equipped with the most inclusive scanning, logging, and calibration package in the industry.  This tool is priced with 4 credits applied to it.  4 credits are used for each Polaris type vehicle VIN license.  This does not include any...

Simply send us your original Polaris MG1 ECU to be professionally upgraded for tuning using HP Tuners’ software directly via the diagnostics port.  All Polaris MG1 ecu's need to be unlocked in order to tune it using the HP tuners devices...

These credits only apply to an HP tuner MPVI or RTD device that you purchased directly from Gilomen Innovations.  If you purchased a MPVI or RTD device from another company, you will need to but your credits directly through them or on HP tuner...

HP Tuner's RTD Interface with 4 credits (each vehicle vin needs 4 credits) This does not include a tune.  The tune needs to be purchased separately under your vehicle year and model. The HP Tuner's Remote Tuning Device is a device that eliminates...

Turn up the power on your Polaris side-by-side, Bobcat UTV, and Indian motorcycle with HP Tuners’ Polaris OBDII Adapter Cable.  This Polaris OBDII Adapter Cable is required for tuning any supported vehicles under the Polaris brand including...

Harness kit only for SpeedoHealer v4 modules. (Does not include SpeedoHealer v4 module)